SAM9X35 Atmel Corporation, SAM9X35 Datasheet - Page 881

• Manufacturer Part Number: SAM9X35
• Manufacturer: Atmel Corporation

Specifications of SAM9X35

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 105
• Ext Interrupts: 105
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 3
• Uart: 7
• Can: 2
• Lin: 4
• Ssc: 1
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 12
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: DDR/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

39.8.16
Name:
Address:
Access:
• NACT: LIN Node Action
Values which are not listed in the table must be considered as “reserved”.
• PARDIS: Parity Disable
0: In Master node configuration, the Identifier Parity is computed and sent automatically. In Master node and Slave node
configuration, the parity is checked automatically.
1:Whatever the node configuration is, the Identifier parity is not computed/sent and it is not checked.
• CHKDIS: Checksum Disable
0: In Master node configuration, the checksum is computed and sent automatically. In Slave node configuration, the check-
sum is checked automatically.
1: Whatever the node configuration is, the checksum is not computed/sent and it is not checked.
• CHKTYP: Checksum Type
0: LIN 2.0 “Enhanced” Checksum
1: LIN 1.3 “Classic” Checksum
• DLM: Data Length Mode
0: The response data length is defined by the field DLC of this register.
1: The response data length is defined by the bits 5 and 6 of the Identifier (IDCHR in US_LINIR).
• FSDIS: Frame Slot Mode Disable
0: The Frame Slot Mode is enabled.
1: The Frame Slot Mode is disabled.
11054A–ATARM–27-Jul-11
11054A–ATARM–27-Jul-11
WKUPTYP
Value
31
23
15
00
01
10
–
–
7
USART LIN Mode Register
US_LINMR
0xF801C054 (0), 0xF8020054 (1), 0xF8024054 (2)
Read-write
FSDIS
30
22
14
–
–
6
SUBSCRIBE
PUBLISH
IGNORE
Name
DLM
29
21
13
–
–
5
Description
The USART transmits the response.
The USART receives the response.
The USART does not transmit and does not receive the response.
CHKTYP
28
20
12
–
–
4
DLC
CHKDIS
27
19
11
–
–
3
PARDIS
26
18
10
–
–
2
25
17
–
–
9
1
SAM9X25
SAM9X25
NACT
PDCM
24
16
–
8
0
881
881