SAM3N0C Atmel Corporation, SAM3N0C Datasheet - Page 652

• Manufacturer Part Number: SAM3N0C
• Manufacturer: Atmel Corporation

33.5.5
33.5.6
33.6
33.6.1
652
652
Functional Description
SAM3N
SAM3N
Timer Triggers
Conversion Performances
Analog-to-digital Conversion
Table 33-3.
Timer Counters may or may not be used as hardware triggers depending on user requirements.
Thus, some or all of the timer counters may be unconnected.
For performance and electrical characteristics of the ADC, see the product DC Characteristics
section.
The ADC uses the ADC Clock to perform conversions. Converting a single analog value to a 10-
bit digital data requires Tracking Clock cycles as defined in the field TRACKTIM of the
Mode Register” on page 661
same register. The ADC Clock frequency is selected in the PRESCAL field of the Mode Register
(ADC_MR). The tracking phase starts during the conversion of the previous channel. If the track-
ing time is longer than the conversion time, the tracking phase is extended to the end of the
previous conversion.
The ADC clock range is between MCK/2, if PRESCAL is 0, and MCK/512, if PRESCAL is set to
255 (0xFF). PRESCAL must be programmed in order to provide an ADC clock frequency
according to the parameters given in the product Electrical Characteristics section.
ADC
ADC
ADC
I/O Lines
and Transfer Clock cycles as defined in the field TRANSFER of the
AD13
AD14
AD15
PC29
PC30
PC31
11011A–ATARM–04-Oct-10
11011A–ATARM–04-Oct-10
X1
X1
X1
“ADC