IDT88P8341 Integrated Device Technology, IDT88P8341 Datasheet - Page 17

• Manufacturer Part Number: IDT88P8341
• Description: Spi Exchange Spi-3 To Spi-4
• Manufacturer: Integrated Device Technology

3.2 SPI-4
tation agreement.
3.2.1 SPI-4 ingress
IDT88P8341 SPI EXCHANGE SPI-3 TO SPI-4
Refer to OIF SPI-4 document (see Glossary) for full details of the implemen-
- Clock rate is 80 - 400 MHz (160 - 800MHz DDR)
- Link and PHY modes supported
- Address range 0 to 255 with support for 64 simultaneously active logical
- MAXBURST parameters configurable 16-256 bytes in 16 byte multiples
- 256 entry calendar
- LVTTL and LVDS status signals supported
The following are implemented for the SPI-4 interface:
- Link / PHY layer device
- Physical port active
The SPI-4 ingress includes
•
•
•
•
•
ports
Bit alignment
Word alignment/ de-skew
Transfer decode and dispatch
PFP interface
Status frame generation
17
SPI-4 ingress configurable parameters
SPI-4 LID map
Word / bit synchronization
Minimum packet length
short packet counter.
Maximum packet length
long packet counter.
Free segment backpressure threshold
- 256 entries, one per SPI-4 LP
- SPI-3 physical interface identifier
- Physical port enable
- LVDS clock data alignment and LVDS data de-skew
- Packets shorter than the minimum length will be optionally counted in the
- Range 0 – 255 in 1 byte increments
- Packets longer than the maximum length will be optionally counted in the
- Range 0 – 16,383 in 1 byte increments
- Number of free buffer segments allocated to trigger backpressure for the LP
INDUSTRIAL TEMPERATURE RANGE
APRIL 10, 2006