SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 148

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

B – Command Line Interface
Show Command
B-50
perf [option]
Displays performance information for all ports. Refer to the
on page
port [port_number]
Displays operational information for the port given by [port_number]. Ports are
numbered beginning with 0. If [port number] is omitted, information is displayed for
all ports.
AIinit
AIinitError
Bad Frames
ClassXFramesIn
ClassXFramesOut
ClassXWordsIn
ClassXWordsOut
ClassXToss
DecodeError
EpConnects
FBusy
Flowerrors
FReject
InvalidCRC
InvalidDestAddr
LIP ALPD ALPS
B-65.
Table B-15
Entry
describes the port parameters.
Table B-15. Show Port Parameters
Incremented each time the port begins AL initialization.
Number of times the port entered initialization and the
initialization failed.
Number of frames that have framing errors.
Number of class x frames received by this port.
Number of class x frames sent by this port.
Number of class x words received by this port.
Number of class x words sent by this port.
Number of times an SOFi3 or SOFn3 frame is tossed from
TBUF.
Number of decode errors detected
Number of times an E_Port connected through ISL
negotiation.
Number of times the switch sent a F_BSY because Class 2
frame could not be delivered within ED_TOV time. Number
of class 2 and class 3 fabric busy (F_BSY) frames
generated by this port in response to incoming frames.
This usually indicates a busy condition on the fabric or
N_Port that is preventing delivery of this frame.
Received a frame when there were no available credits.
Number of frames from devices that were rejected.
Invalid CRC detected.
Invalid destination address detected.
Number of F7, AL_PS LIPs, or AL_PD (vendor specific)
resets, performed.
Description
”Show Perf Command”
59021-06 A