SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 56

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

4 – Installation
Installing a Switch
4.2.4
Connect the Management Workstation to the Switch
4-8
Connect the management workstation to the switch in one of three ways:
Figure 4-3. Ethernet and Serial Cable Connections
Indirect Ethernet connection from the management workstation to the switch
RJ-45 Ethernet connector through an Ethernet switch or a hub. This requires
a 10/100 Base-T straight cable as shown in
you can manage the switch with the SANbox Manager application or
Command Line Interface.
Direct Ethernet connection from the management workstation to the switch
RJ-45 Ethernet connector. This requires a 10/100 Base-T cross-over cable
as shown in
the SANbox Manager application or Command Line Interface.
Serial port connection from the management workstation to the switch
RS-232 serial port connector. This requires a null modem F/F DB9 cable as
shown in
Command Line Interface.
RJ-45 Connection
Indirect Ethernet
Figure
Figure
4-3. With this method, you can manage the switch with
RJ-45 Connection
4-3. With this method, you can manage the switch with
Direct Ethernet
Serial RS-232
Connection
Figure
4-3. With this method,
59021-06 A