SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 188

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

Class 3 Service
Configured Zone Sets
Default Visibility
Domain ID
Event Log
Expansion Port
Fabric Database
Fabric Management Switch
Fabric Name
Fabric Port
Glossary-2
A service which multiplexes frames at
frame boundaries to or from one or more
N_Ports without acknowledgment.
The zone sets stored on a switch
excluding the active zone set.
Zoning parameter that determines the
level of communication among
ports/devices when there is no active zone
set.
User defined number that identifies the
switch in the fabric.
Log of messages describing events that
occur in the fabric.
E_Port that connects to another FC-SW-2
compliant switch.
The set of fabrics that have been opened
during a SANbox Manager session.
The switch through which the fabric is
managed.
User defined name associated with the file
that contains user list data for the fabric.
An F_Port or FL_Port.
Fabric View File
Fan Fail LED
FC-PLDA
Flash Memory
Frame
FRU
Heartbeat LED
Inactive Firmware
Inband Management
Initiator
A file containing a set of fabrics that were
opened and saved during a previous
SANbox Manager session.
An LED that indicates that a cooling fan in
the switch is operating below standard.
Fibre Channel Private Loop Direct Attach
Memory on the switch that contains the
chassis control firmware.
Data unit consisting of a start-of-frame
(SOF) delimiter, header, data payload,
CRC, and an end-of-frame (EOF)
delimiter.
Field Replaceable Unit
A chassis LED that indicates the status of
the internal switch processor and the
results of the Power-On Self-Test.
The firmware image on the switch that is
not in use.
The ability to manage a switch through
another switch over an inter-switch link.
The device that initiates a data exchange
with a target device.
SANbox2-16 Fibre Channel Switch
Installation Guide
59021-06 A