SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 63

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

4.2.12
Configure the Switch
59021-06 A
Do the following to configure a switch using the SANbox Manager application.
Refer to the SANbox2-8c/16 Switch Management User’s Guide for more
information about configuring a switch. You can also configure the switch using
the Command Line Interface. Refer to
more information.
1.
2.
3.
4.
5.
6.
Repeat this process for each switch in the fabric, then connect the switches.
Connect to the switch using an Ethernet connection and run SANbox
Manager.
Open the Fabric menu and select Add Fabric to open the Add a New Fabric
window.
Enter a fabric name and the IP address of the switch through which to
manage the fabric. The default IP address is 10.0.0.1. If this is a new switch,
leave the login name and password fields empty, and choose the Add
Fabric button. By default, fabric security is disabled, and therefore account
names and passwords are not enforced. Refer to the
on page B-43
Open the Switch menu and select Switch Properties. In the Switch
Properties window, enter a chassis name. Accept the default domain ID, and
choose the OK button.
Open the Switch menu and select Network Properties. In the Network
Properties window, enter values for the IP address, subnet mask, and
gateway address. Accept the default boot method. If you know the SNMP
configuration settings, enter those as well. Choose the OK button.
Set the date and time. Double click on the switch in the topology display. In
the faceplate display, open the Switch menu and select Set Date/Time.
Enter the date and time in the Switch Date and Time window and choose the
OK button. Reset the switch when prompted to implement the new and date
and time.
for information about setting fabric security.
Appendix B Command Line Interface
”Set Setup Command”
Installing a Switch
4 – Installation
for
4-15