M5249C3 Freescale Semiconductor, M5249C3 Datasheet - Page 41

• Manufacturer Part Number: M5249C3
• Description: KIT EVAL FOR M5249 W/ETHERNET
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5249C3

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MCF5249
• Interface Type: RS-232, Ethernet
• For Use With/related Products: MCF5249
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

MM
Usage:
The MM command modifies memory at the address addr. The value for addr may be an absolute address
specified as a hexadecimal value, or a symbol name. Width specifies the size of the data that is modified.
If no <width> is specified, the default of word sized data is used. The value for data may be a symbol name,
or a number converted according to the user-defined radix, normally hexadecimal.
If a value for data is provided, then the MM command immediately sets the contents of addr to data. If no
value for data is provided, then the MM command enters into a loop. The loop obtains a value for data,
sets the contents of the current address to data, increments the address according to the data size, and
repeats. The loop terminates when an invalid entry for the data value is entered, i.e., a period.
This command first aligns the starting address for the data access size, and then increments the address
accordingly during the operation. Thus, for the duration of the operation, this command performs
properly-aligned memory accesses.
Examples:
To set the byte at location 0x00010000 to be 0xFF, the command is:
To interactively modify memory beginning at 0x00010000, the command is:
Freescale Semiconductor
mm.b
mm
MM<width> addr <data>
10000 FF
10000
M5249C3 User’s Manual, Rev. 1
Using the Monitor/Debug Firmware
Memory Modify
2-25