PIC32MX695F512L-80I/BG Microchip Technology, PIC32MX695F512L-80I/BG Datasheet - Page 147

• Manufacturer Part Number: PIC32MX695F512L-80I/BG
• Description: IC, 32BIT MCU, PIC32, 80MHZ, BGA-100
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX695F512L-80I/BG

• Controller Family/series: PIC32
• Ram Memory Size: 128KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Interface: I2C, SPI, UART, USB
• No. Of Pwm Channels: 5
• Core Size: 32 Bit
• Program Memory Size: 512 KB
• Core Processor: MIPS32® M4K™
• Speed: 80MHz
• Connectivity: Ethernet, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-TFBGA
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: PIC32MX6xx
• Core: MIPS
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of I /o: -
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

25.0
FIGURE 25-1:
 2009 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
CV
CV
C1IN+
IV
IV
Note 1: On devices with a USB module, and when the module is enabled, this pin is controlled by the USB module
2: Some registers and associated bits
C1IN+
C2IN+
C2IN+
C2IN+
C1IN+
REF
C1IN-
REF (2)
REF
C2IN-
REF (2)
COMPARATOR
of the PIC32MX5XX/6XX/7XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet,
“Comparator”
“PIC32MX Family Reference Manual” ,
which is available from the Microchip web
site (www.microchip.com/PIC32).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
(1)
(2)
(2)
2: Internally connected.
and therefore is not available as a comparator input.
COMPARATOR BLOCK DIAGRAM
refer
CCH<1:0>
CCH<1:0>
CREF
CREF
to
(DS61110) in the
Section
Comparator 1
Comparator 2
19.
C1
C2
Preliminary
ON
ON
PIC32MX5XX/6XX/7XX
The PIC32MX5XX/6XX/7XX analog comparator mod-
ule contains two comparators that can be configured in
a variety of ways.
Following are some of the key features of this module:
• Selectable Inputs available include:
• Outputs can be Inverted
• Selectable Interrupt Generation
A block diagram of the comparator module is shown in
Figure 25-1.
CPOL
CPOL
- Analog inputs multiplexed with I/O pins
- On-chip internal absolute voltage reference
- Comparator voltage reference (CV
(IV
REF
)
COE
COE
COUT (CM1CON)
C1OUT (CMSTAT)
COUT (CM2CON)
C2OUT (CMSTAT)
DS61156B-page 147
REF
)
C1OUT
C2OUT