C200H-DA001 Omron, C200H-DA001 Datasheet - Page 12

• Manufacturer Part Number: C200H-DA001
• Description: 2PT-D/A:12-BIT
• Manufacturer: Omron

Specifications of C200H-DA001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Features
Select from Eleven C200H CPUs within Alpha’s
Three Basic Model Types
Each model has different program capacities, processing
speeds, I/O capabilities, communications connections and fea-
tures. (The C200H CPU Selection Table is provided later in
this section.)
Optional Back-up Memory Cassettes
For program back-up or rewrite option, each CPU has a special
Memory Cassette compartment.
Multifunctional Peripheral Port
Directly connect to programming peripherals or communicate to
Omron’s Operator Interface Terminals and other third party de-
vices using an optional CIF Convertor Cable.
Built-in RS-232C Port
Direct Host Link communications to the CPU or interface with
other devices through serial communications. Available on se-
lected models only.
Versatile Communications
Install one of six C200H Communications Boards to have addi-
tional communications ports. The boards fit into the communica-
tions slot in the CPU and enable communication with SYSMAC
LINK or SYSMAC NET modules, a PC card module or a variety
of serial devices -- including Operator Interfaces. Order the
Communications Board and Memory Cassette separately (not
provided with the CPU).
Protocol Macro
Three C200H Communications Boards offer the Protocol Mac-
ro Instruction that controls data transfer with various commu-
nications devices and components equipped with RS-232C or
RS-422/-485 ports. With the Protocol Macro Function built into
the C200HW-COM04, C200HW-COM05-E and C200HW-
COM06-E Communications Boards, communications se-
quences (data transfer procedures) may be modified with Om-
ron’s Protocol Support Software.
Although seven Omron Communications sequences are built-in,
you can use the Protocol Support Software to create other com-
munications sequences. For more details, refer to the Commu-
nication Board section that follows.
Communications Board (C200HW-COM06-E shown here)
Indicators
INDICATOR ON THE CPU
RUN (green)
ERR (red)
INH (orange)
COMM (orange)
SYSMAC C200HX
Programmable Controller
CPU64
YOUR INTRODUCTION TO THE C200HX/HG/HE CPU
FUNCTION
Lit when the PLC is operating normally.
Flashes when the CPU is communicating with the
device connected to the peripheral port or
RS-232C port.
Flashes if the PLC in operation detects any
non-fatal error. (The PLC will continue
operating.) Lit if the PLC in operation detects any
fatal error. (The PLC will stop operating. ) After
the PLC stops operating, the RUN indicator will
be off, and all output signals of the Output
Modules will be interrupted.
Lit when the Load OFF flag (AR bit) is ON. (All
output signals of the Output Modules will be
interrupted.)
Memory cassette
LED
Indicators
DIP switch
Multifunctional
Peripheral port
RS-232C port
9
CPU