C200H-DA001 Omron, C200H-DA001 Datasheet - Page 51

• Manufacturer Part Number: C200H-DA001
• Description: 2PT-D/A:12-BIT
• Manufacturer: Omron

Specifications of C200H-DA001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

48
SPECIAL I/O MODULES
PID CONTROL MODULES
Specifications
PART NUMBER
Input signal range
Input points (no. of loops)
Control mode
No. of banks
Setting/Indication accuracy
Hysteresis
Proportional band
Integral (reset) time
Derivative (rate) time
Control period
Sampling period
Input shift range
Internal current consumption
External supply voltage
Weight
Manual
C200H-PID0


C200H-DSC01
Data Setting Console
C200H-PID0
4 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 V
Two points (two loops, each of which consists of a voltage and a current)
PID, ON/OFF (selectable with a switch on the rear panel) (advanced PID control with auto-tuning)
8 banks
0.0 to 100.0% FS (in units of 0.1% FS)
0.0 to 999.9 (in units of 0.1)
0 to 9,999 s (in units of 1 s)
0 to 9,999 s (in units of 1 s)
1 to 99 s (in units of 1 s)
100 ms
--999 to 9,999 (decimal point position is designated by a parameter setting)
5 VDC, 0.33 A max. (supplied from the Backplane)
24 VDC
360 g max.
W241
0.5% FS 1 digit max. The SV and displayed value match. There is no relative error.
+10%


/
--15%
, 200 mA min.
This module provides two independent PID loops for process
control right on the PLC rack. Based on Omron’s E5EX-LA
process controller, the C200H-PID0
voltage analog inputs for pressure, flow and other measure-
ments. The module can be programmed and controlled from the
PLC or from the optional Data Setting Console. (Details on the
Data Setting console are found later in this section.)
Features
Advanced PID -- stable PID control using advanced PID and
an auto-tuning feature. ON/OFF control can also be selected.
High-speed sampling period of 100 ms -- a sampling period of
100 ms is achieved with two loops, enabling high-speed PID
control.
Input noise reduction with digital filter -- mitigation of sudden
input fluctuations makes the PID Control Module effective in
quick-response systems.
Three types of output specification versions are available:
C200H-PID01 for transistor output, C200H-PID02 for voltage
output, and C200H-PID03 for current output.
Eight banks of data settings -- eight data values, including set
point (SP) and alarm set values, can be preset in eight data
banks for easy selection.
Data input and display using Data Setting Console to input
data and display process values (PV) and set values (SV).
Easy-to-read display can be panel-mounted.
Data reading/writing -- the user program of the
C200HX/HG/HE allows reading or writing of various data.


accepts both current and