C200H-DA001 Omron, C200H-DA001 Datasheet - Page 63

• Manufacturer Part Number: C200H-DA001
• Description: 2PT-D/A:12-BIT
• Manufacturer: Omron

Specifications of C200H-DA001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

60
SPECIAL I/O MODULES
CAM POSITIONER MODULE
Specifications
PART NUMBER
Output points
External outputs
Resolver cable length
Resolver response rpm
Resolver response speed
Resolver resolution
Program memory
Origin compensation
Internal current consumption
External power supply
Weight
Manual
C200H-CP114
C200H-CP114
48 points (16 external output points, 32 internal output points)
NPN transistor open collector (with photo-coupler insulation)
Switching capacity: 100 mA at 24 VDC
Simultaneous ON points: 8 points max.
100 m max.
800 rpm max.
200 s (at a sampling frequency of 5 kHz)
1
EEPROM (8 banks)
1 or 359 (The present angle needs to be compensated to 0 )
5 VDC, 0.3 A max. (Supplied from the Backplane.)
24 VDC
350 g max.
W224
C200H-DSC01
Data Setting Console
+10%
/
--15%
, 2 A min.
The Cam Positioner Module simulates a rotating mechanical
cam, drum sequencer, or programmable limit switch in a PLC
I/O module. The module provides a resolver interface and uses
the Data Setting Console for displaying values.
Features
The cam outputs can be set at 16 external outputs and 32
internal outputs with a total of 48 points. The internal outputs
can be taken directly into the C200HX/HG/HE, reducing
wiring inside the control panel.
The ON/OFF data for the maximum of seven points can be
set for one cam. Data can be registered in one bank. To
facilitate easy set-up changes during operation, a maximum
of eight banks is available for data setting.
The Data Setting Console allows easy monitoring of cam
data settings, present cam angles, or resolver rpm.
To provide an optimum output, use the adjustable operation
function to make fine adjustments of the ON/OFF data.
Data on operating conditions -- such as the present cam
angle, cam outputs for 48 points, resolver rpm, and resolver
status -- can be constantly monitored from the
C200HX/HG/HE side.
Using origin compensation, the machine origin and the
resolver origin can be easily matched.
The resolver rpm can be converted into an actual production
quantity by using the scaling function.