DS33R41+ Maxim Integrated Products, DS33R41+ Datasheet - Page 78

• Manufacturer Part Number: DS33R41+
• Description: IC TXRX ETHERNET MAP 400-BGA
• Manufacturer: Maxim Integrated Products
• Type: Transceiverr

Specifications of DS33R41+

• Number Of Drivers/receivers: 4/4
• Protocol: T1/E1/J1
• Voltage - Supply: 3.14 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 400-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.7.3 Frames Out-of-Sync Count Register (TR.FOSCR)
In T1 mode, TR.FOSCR is used to count the number of multiframes that the receive synchronizer is out of sync.
This number is useful in ESF applications needing to measure the parameters loss-of-frame count (LOFC) and
ESF error events as described in AT&T publication TR54016. When TR.FOSCR is operated in this mode, it is not
disabled during receive loss-of-synchronization (RLOS = 1) conditions. TR.FOSCR has an alternate operating
mode whereby it counts either errors in the Ft framing pattern (in the D4 mode) or errors in the FPS framing pattern
(in the ESF mode). When TR.FOSCR is operated in this mode, it is disabled during receive loss-of-synchronization
(RLOS = 1) conditions.
Table 10-8. T1 Frames Out-of-Sync Counting Arrangements
In E1 mode, TR.FOSCR counts word errors in the FAS in time slot 0. This counter is disabled when RLOS is high.
FAS errors are not counted when the framer is searching for FAS alignment and/or synchronization at either the
CAS or CRC4 multiframe level. Since the maximum FAS word error count in a one-second period is 4000, this
counter cannot saturate.
The frames out-of-sync count register 1 (TR.FOSCR1) is the most significant word and TR.FOSCR2 is the least
significant word of a 16-bit counter that records frames out-of-sync.
10.7.4 E-Bit Counter (TR.EBCR)
This counter is only available in E1 mode. E-bit count register 1 (TR.EBCR1) is the most significant word and
TR.EBCR2 is the least significant word of a 16-bit counter that records far-end block errors (FEBE) as reported in
the first bit of frames 13 and 15 on E1 lines running with CRC4 multiframe. These count registers increment once
each time the received E-bit is set to 0. Since the maximum E-bit count in a one-second period is 1000, this
counter cannot saturate. The counter is disabled during loss-of-sync at either the FAS or CRC4 level; it continues
to count if loss-of-multiframe sync occurs at the CAS level.
FRAMING MODE
(TR.T1RCR1.3)
ESF
ESF
D4
D4
Table 10-8
COUNT MOS OR
F-BIT ERRORS
(TR.ERCNT.1)
shows what the FOSCR is capable of counting.
MOS
MOS
F-Bit
F-Bit
78 of 335
Number of multiframes out-of-sync
Errors in the Ft pattern
Number of multiframes out-of-sync
Errors in the FPS pattern
COUNTED IN THE FOSCRs