th58nvg1s3aft05 TOSHIBA Semiconductor CORPORATION, th58nvg1s3aft05 Datasheet - Page 25

• Manufacturer Part Number: th58nvg1s3aft05
• Description: 2gbit 256m U 8bits Cmos Nand E2 Prom
• Manufacturer: TOSHIBA Semiconductor CORPORATION

(5) Acceptable commands after Serial Input command "80H"
(6) Addressing for program operation
RY
Once the Serial Input command "80H" has been input, do not input any command other than the Column
Address Change in Auto Program command "10H” or the Reset command "FFH".
If a command other than "10H" or "FFH" is input, the Program operation is not performed and the device
operation is set to the mode which the input command specifies..
the block to MSB (most significant bit) page of the block. Random page address programming is prohibited.
/
From the LSB page to MSB page
WE
BY
DATA IN: Data (1)
Within a block, the pages must be programmed consecutively from the LSB (least significant bit) page of
Page 31
Page 63
Page 0
Page 1
Page 2
80
80
Command other than
"10H" or “FFH”
Address input
Data (64)
Data register
XX
(32)
(64)
(1)
(2)
(3)
Figure 17. page programming within a block
Mode specified by the command.
Ex.) Random page program (Prohibition)
DATA IN: Data (1)
Page 31
Page 63
Page 0
Page 1
Page 2
FF
10
Programming cannot be executed.
Data (64)
Data register
(32)
(64)
(2)
(3)
(1)
TH58NVG1S3AFT05
2003-05-19A
25/32