ml7084-001 Oki Semiconductor, ml7084-001 Datasheet - Page 214

• Manufacturer Part Number: ml7084-001
• Description: 4ch Voip Codec
• Manufacturer: Oki Semiconductor

Decode Output Start Offset Time Control (DEC_ONTIM)
Initial value : 0000h(0 ms)
Use the following equation when changing the decode output start offset time (tDECON).
Equation: “Decode output start offset time”ms/0.125 ms
Example: 5 ms
(Note)
With G.711 (when the PLC function is enabled), silence data of approximately 3.75 ms is output and then decode
output starts, after setting the decode output control register (DEC_OUTON) to “1”, regardless of the decode output
start offset time. (Because of G.711 PLC algorithm delay)
In other words, note that the time until the actual decode output is started will be the time obtained by adding
approximately 3.75 ms to the set value of the decode output start offset time in the internal data memory described
above. Moreover, with G.711 (when the PLC function is disabled), decode output will start after the decode output
start offset time set in the data memory described above.
Internal Data Memory for Setting the Start Address for Writing Multiple Words (START_ADDRESS )
Set the start address of an internal data memory when a write to consecutive address spaces of the internal data
memory will be performed according to the procedure shown in Figure 35. (Initial value: 0000h)
OKI Semiconductor
5/0.125 = 0040d = 0028h
Upper limit: 32 ms
Lower limit: 0.0 ms
(data: 0100h)
(data: 0000h)
FEDL7224-001FULL-01
ML7224-001TC
214/225