MC9S12NE64CPV Freescale Semiconductor, MC9S12NE64CPV Datasheet - Page 177

• Manufacturer Part Number: MC9S12NE64CPV
• Description: IC MCU 25MHZ ETHERNT/PHY 112LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12NE64CPV

• Mfg Application Notes: MC9S12NE64 Integrated Ethernet Controller Implementing an Ethernet Interface with the MC9S12NE64 Web Server Development with MC9S12NE64 and Open TCP
• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 3.465 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 16 bit
• Operating Supply Voltage: - 0.3 V to + 3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• On-chip Adc: 10 bit
• For Use With: EVB9S12NE64E - BOARD EVAL FOR 9S12NE64DEMO9S12NE64E - DEMO BOARD FOR 9S12NE64
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Chapter 5
Oscillator (OSCV2)
5.1
The OSCV2 module provides two alternative oscillator concepts:
5.1.1
The Colpitts OSCV2 option provides the following features:
The Pierce OSC option provides the following features:
Common features:
5.1.2
Two modes of operation exist:
5.2
This section lists and describes the signals that connect off chip.
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
•
•
A low noise and low power Colpitts oscillator with amplitude limitation control (ALC)
A robust full swing Pierce oscillator with the possibility to feed in an external square wave
Amplitude limitation control (ALC) loop:
— Low power consumption and low current induced RF emission
— Sinusoidal waveform with low RF emission
— Low crystal stress (an external damping resistor is not required)
— Normal and low amplitude mode for further reduction of power and emission
An external biasing resistor is not required
Wider high frequency operation range
No DC voltage applied across the crystal
Full rail-to-rail (2.5 V nominal) swing oscillation with low EM susceptibility
Fast start up
Clock monitor (CM)
Operation from the V
Amplitude limitation controlled Colpitts oscillator mode suitable for power and emission critical
applications
Full swing Pierce oscillator mode that can also be used to feed in an externally generated square
wave suitable for high frequency operation and harsh environments
Introduction
External Signal Description
Features
Modes of Operation
DDPLL
2.5 V (nominal) supply rail
MC9S12NE64 Data Sheet, Rev. 1.1
177