HD64F38024DV Renesas Electronics America, HD64F38024DV Datasheet - Page 708

• Manufacturer Part Number: HD64F38024DV
• Description: IC H8/SLP MCU FLASH 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300L SLPr

Specifications of HD64F38024DV

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: SCI
• Peripherals: LCD, PWM, WDT
• Number Of I /o: 51
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

694
Specification
Single register
Multiple register
Redefining alias of register
Notes: 1. The alias of a register name defined with .REG cannot be
Register specification is as follows:
2. Definitions with the .REG directive are valid from the point of the
3. Symbols defined with .REG have the following limitations:
4. The combination of registers specified in the H8SX series is as
redefined.
definition forward in the program.
They cannot be used as externally defined or externally referenced
symbols.
They cannot be referenced from the debugger.
follows: (ERn-ERn+1; n = 0 to 6), (ERn-ERn+2; n = 0 to 5), (ERn-
ERn+3; n = 0 to 4).
The combination of registers specified in the H8S/2600 series and
H8S/2000 series is as follows: (ER0-ER1), (ER2-ER3), (ER4-ER5),
(ER6-ER7), (ER0-ER2), (ER4-ER6), (ER0-ER3), (ER4-ER7).
Description
Specify either R0L
to R7L, R0H to
R7H, R0 to R7, E0
to E7, or ER0 to
ER7.
Specify more than
one register at
once by delimiting
them with hyphen (-
). If the left register
number is smaller
than the right
register number, an
error occurs
and .REG directive
is ignored.
Specify an already
defined register
alias for an
operand.
Example
SINGLEREG .REG (R0)
An alias SINGLEREG is
defined for register R0.
RNG1 REG (ER0-ER3)
An alias RNG1 is defined for
four registers ER0, ER1,
ER2, and ER3.
RNG2 .REG (ER3-ER0)
An error occurs because
ER0 on the right is smaller
than ER3 on the left.*
ER00 .REG (ER0-ER3)
ER01 .REG (ER00)
An alias ER01 is defined for
four registers ER0 to ER3.
4