AT91SAM7X512-AU Atmel, AT91SAM7X512-AU Datasheet - Page 293

• Manufacturer Part Number: AT91SAM7X512-AU
• Description: MCU ARM 512K HS FLASH 100-LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X512-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 128 KB
• Interface Type: CAN, SPI, SSC, TWI, USART, USB
• Maximum Clock Frequency: 55 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM7X-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7X-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• No. Of I/o's: 62
• Ram Memory Size: 128KB
• Cpu Speed: 55MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 4
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7X-EK - KIT EVAL FOR AT91SAM7X256/128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6120H–ATARM–17-Feb-09
Figure 29-18. TWI Read Operation with Multiple Data Bytes with or without Internal Address
No
AT91SAM7X512/256/128 Preliminary
Read Receive Holding register (TWI_RHR)
Read Receive Holding register (TWI_RHR)
(CLDIV, CHDIV, CKDIV) in TWI_CWGR
- Internal address size (if IADR used)
Set the Master Mode register:
Read ==> bit MREAD = 1
Internal address size = 0?
Set the Control register:
- Device slave address
- Transfer direction bit
Read Status register
Read Status register
Read status register
(Needed only once)
TWI_CR = MSEN
TWI_CR = START
TWI_CR = STOP
Yes
Last data to read
Start the transfer
Stop the transfer
- Master enable
TXCOMP = 1?
Set TWI clock
RXRDY = 1?
Yes
Yes
Yes
RXRDY = 1?
Yes
but one?
BEGIN
END
No
No
No
Set the internal address
TWI_IADR = address
293