MCF5214CVF66J Freescale Semiconductor, MCF5214CVF66J Datasheet - Page 422

• Manufacturer Part Number: MCF5214CVF66J
• Description: IC MCU 256K FLASH 256MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5214CVF66J

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Processor Series: MCF521x
• Core: ColdFire V2
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: M52210DEMO, M52211EVB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

UART Modules
The serial communication channel provides a full-duplex asynchronous/synchronous receiver and
transmitter deriving an operating frequency from the internal bus clock or an external clock using the timer
pin. The transmitter converts parallel data from the CPU to a serial bit stream, inserting appropriate start,
stop, and parity bits. It outputs the resulting stream on the transmitter serial data output (UTXDn). See
Section 23.4.2.1,
The receiver converts serial data from the receiver serial data input (URXDn) to parallel format, checks
for a start, stop, and parity bits, or break conditions, and transfers the assembled character onto the bus
during read operations. The receiver may be polled, interrupt driven, or use DMA requests for servicing.
See
23.1.2
The device contains three independent UART modules with:
23-2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Section 23.4.2.2,
Each clocked by external clock or internal bus clock (eliminates need for an external UART clock)
Full-duplex asynchronous/synchronous receiver/transmitter
Quadruple-buffered receiver
Double-buffered transmitter
Independently programmable receiver and transmitter clock sources
Programmable data format:
— 5–8 data bits plus parity
— Odd, even, no parity, or force parity
— One, one-and-a-half, or two stop bits
Each serial channel programmable to normal (full-duplex), automatic echo, local loopback, or
remote loopback mode
Automatic wake-up mode for multidrop applications
Four maskable interrupt conditions
All three UARTs have DMA request capability
Parity, framing, and overrun error detection
False-start bit detection
Line-break detection and generation
Detection of breaks originating in the middle of a character
Features
The DTINn pin can clock UARTn. However, if the timers are operating and
the UART uses DTINn as a clock source, input capture mode is not available
for that timer.
The GPIO module must be configured to enable the peripheral function of
the appropriate pins (refer to
prior to configuring the UART module.
“Transmitter.”
“Receiver.”
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
Chapter 26, “General Purpose I/O
NOTE
NOTE
Module”)
Freescale Semiconductor