DF2367VTE33 Renesas Electronics America, DF2367VTE33 Datasheet - Page 120

• Manufacturer Part Number: DF2367VTE33
• Description: IC H8S MCU FLASH 384K 120TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2367VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2367VTE33; HD64F2367VTE33

Section 3 MCU Operating Modes
3.3
3.3.1
The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is disabled.
Ports A, B, and C function as an address bus, ports D and E function as a data bus, and parts of
ports F, and G, carry bus control signals.
The initial bus mode after a reset is 16 bits, with 16-bit access to all areas. However, if 8-bit access
is designated for all areas by the bus controller, the bus mode switches to 8 bits.
3.3.2
The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is disabled.
Ports A, B, and C function as an address bus, ports D and E function as a data bus, and parts of
ports F, and G carry bus control signals.
The initial bus mode after a reset is 8 bits, with 8-bit access to all areas. However, if 16-bit access
is designated for any one of the areas by the bus controller, the bus mode switches to 16 bits and
port E functions as a data bus.
3.3.3
This mode is a boot mode of the flash memory. This mode is the same as mode 7, except for the
programming and erasure on the flash memory. Mode 3 is only available in the H8S/2368 Group
flash memory version.
3.3.4
The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is enabled.
The program in the on-chip ROM connected to the first half of area 0 is executed.
Ports A, B, and C function as input ports immediately after a reset, but can be set to function as an
address bus. Ports D and E function as a data bus, and parts of ports F, and G, carry bus control
signals. For details, see section 9, I/O Ports.
The initial bus mode after a reset is 8 bits, with 8-bit access to all areas. However, if 16-bit access
is designated for any area by the bus controller, the bus mode switches to 16 bits and port E
functions as a data bus.
Rev.6.00 Mar. 18, 2009 Page 60 of 980
REJ09B0050-0600
Operating Mode Descriptions
Mode 1
Mode 2
Mode 3
Mode 4