UPD78F9221CS-CAC-A Renesas Electronics America, UPD78F9221CS-CAC-A Datasheet - Page 374

• Manufacturer Part Number: UPD78F9221CS-CAC-A
• Description: MCU 8BIT 2KB FLASH 20PIN
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9221CS-CAC-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Notes
Caution Do not use different soldering methods together (except for partial heating).
Caution Only the pins of the THD are heated when performing wave soldering.
372
Infrared reflow
Wave soldering
Partial heating
Wave soldering
(only for pins)
Partial heating
Soldering Method
Soldering Method
20-pin plastic SDIP (lead-free products)
20-pin plastic SSOP (lead-free products)
PD78F9221MC(A)-CAA-AX, 78F9222MC(A)-CAA-AX, 78F9221MC(A2)-CAA-AX, 78F9222MC(A2)-CAA-AX
After opening the dry pack, store it at 25 C or less and 65% RH or less for the allowable storage period.
PD78F9221CS-CAC-A, 78F9222CS-CAC-A
Make sure that flow solder does not come in contact with the package.
Package peak temperature: 260 C, Time: 60 seconds max. (at 220 C or higher),
Count: 3 times or less, Exposure limit: 7 days
10 to 72 hours)
Solder bath temperature: 260 C max., Time: 10 seconds max., Count: Once,
Preheating temperature: 120 C max. (package surface temperature), Exposure
limit: 7 days
Pin temperature: 350 C max., Time: 3 seconds max. (per pin row)
Solder bath temperature: 260 C, Time: 10 seconds max.
Pin temperature: 350 C max., Time: 3 seconds max. (per one pin)
Table 24-1. Surface Mounting Type Soldering Conditions (2/2)
CHAPTER 24 RECOMMENDED SOLDERING CONDITIONS
Note
(after that, prebake at 125 C for 10 to 72 hours)
User’s Manual U16898EJ6V0UD
Soldering Conditions
Soldering Conditions
Note
(after that, prebake at 125 C for
IR60-107-3
WS60-107-1
Condition Symbol
Recommended