AT91SAM7S32-AU-001 Atmel, AT91SAM7S32-AU-001 Datasheet - Page 656

• Manufacturer Part Number: AT91SAM7S32-AU-001
• Description: IC ARM7 MCU 32BIT 32K 48LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S32-AU-001

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• For Use With: AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: AT91SAM7S32-AU001

40.10.14 Watchdog Timer (WDT)
40.10.14.1
40.10.14.2
656
AT91SAM7S Series Preliminary
WDT: The Watchdog Timer May Lock the Device in a Reset State
WDT: The Watchdog Timer Status Register and Interrupt
Under certain rare circumstances, if the Watchdog Timer is used with the Watchdog Reset
enabled (WDRSTEN set at 1), the Watchdog Timer may lock the device in a reset state when
the user restarts the watchdog (WDDRSTT). The only way to recover from this state is a power-
on reset. The issue depends on the values of WDD and WDV in the WDT_MR register.
Two workarounds are possible.
Under certain rare circumstances, if the Watchdog Timer is used with the Watchdog Fault Inter-
rupt enabled (WDFIEN set at 1), the Watchdog Timer may trigger the interrupt (wdt_fault)
erroneously. The Watchdog Timer Status Register may be wrong also (WDERR and WDUNF).
The issue depends on the values of WDD and WDV in the WDT_MR register.
Two workarounds are possible.
1. Either do not use the Watchdog Timer with the Watchdog Reset enabled (WDRSTEN
2. or set WDD to 0xFFF and in addition use only one of the following values for WDV:
1. Either do not use the Watchdog Timer with the Watchdog fault Interrupt enabled
2. or set WDD to 0xFFF and in addition use only one of the following values for WDV:
Problem Fix/Workaround
Problem Fix/Workaround
set at 1),
0xFFF, 0xDFF, 0xBFF, 0x9FF, 0x7FF, 0x77F, 0x6FF, 0x67F, 0x5FF, 0x57F, 0x4FF,
0x47F, 0x3FF, 0x37F, 0x2FF, 0x27F, 0x1FF, 0x1BF, 0x17F, 0x13F, 0x0FF, 0x0DF, 0x0BF,
0x09F, 0x07F, 0x06F, 0x05F, 0x04F, 0x03F, 0x037, 0x02f, 0x027, 0x01F, 0x01B, 0x017,
0x013 and 0x00F.
(WDFIEN set at 1),
0xFFF, 0xDFF, 0xBFF, 0x9FF, 0x7FF, 0x77F, 0x6FF, 0x67F, 0x5FF, 0x57F, 0x4FF,
0x47F, 0x3FF, 0x37F, 0x2FF, 0x27F, 0x1FF, 0x1BF, 0x17F, 0x13F, 0x0FF, 0x0DF, 0x0BF,
0x09F, 0x07F, 0x06F, 0x05F, 0x04F, 0x03F, 0x037, 0x02f, 0x027, 0x01F, 0x01B, 0x017,
0x013 and 0x00F.
6175K–ATARM–30-Aug-10