AT91SAM9261SB-CU-999 Atmel, AT91SAM9261SB-CU-999 Datasheet - Page 73

• Manufacturer Part Number: AT91SAM9261SB-CU-999
• Description: IC MCU ARM9 ULTRA LP 217LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9261SB-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 190MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: DMA, LCD, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 217-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: 2-Wire, I2S, SPI, USB
• Maximum Clock Frequency: 190 MHz
• Number Of Programmable I/os: 96
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9261-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM9261-EK - KIT EVAL FOR AT91SAM926EJ-SAT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

13. AT91SAM9261S Boot Program
13.1
6242E–ATARM–11-Sep09
Overview
The Boot Program integrates different programs that manage download and/or upload into the
different memories of the product.
First, it initializes the Debug Unit serial port (DBGU) and the USB High Speed Device Port.
The Boot program tries to detect SPI flash memories. The Serial flash Boot program and Data-
Flash
vectors in a Serial Flash or DataFlash connected to the SPI. All these vectors must be B-branch
or LDR load register instructions except for the sixth vector. This vector is used to store the size
of the image to download.
If a valid sequence is found, code is downloaded into the internal SRAM. This is followed by a
remap and a jump to the first address of the SRAM.
If no valid ARM vector sequence is found, NAND Flash Boot program is then executed. The
NAND Flash Boot program looks for a sequence of seven valid ARM exception vectors. If such a
sequence is found, code is downloaded into the internal SRAM. This is followed by a remap and
a jump to the first address of the SRAM.
Then the SD Card Boot program is executed. It looks for a boot.bin file in the root directory of a
FAT12/16/32 formatted SD Card. If such a file is found, code is downloaded into the internal
SRAM. This is followed by a remap and a jump to the first address of the SRAM.
If the SD Card is not formatted or if boot.bin file is not found, TWI Boot program is then exe-
cuted. The TWI Boot program searches for a valid application in a EEPROM memory. If such a
file is found, code is downloaded into the internal SRAM. This is followed by a remap and a jump
to the first address of the SRAM.
If no valid ARM vector sequence is found, SAM-BA Boot is then executed. It waits for transac-
tions either on the USB device, or on the DBGU serial port.
®
Boot program are executed. It looks for a sequence of seven valid ARM exception
AT91SAM9261S
73