HD6473837H Renesas Electronics America, HD6473837H Datasheet - Page 304

• Manufacturer Part Number: HD6473837H
• Description: IC H8 MCU OTP 60K 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Lr

Specifications of HD6473837H

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 5MHz
• Connectivity: SCI
• Peripherals: LCD, PWM
• Number Of I /o: 84
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: OTP
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Transmitting Multiprocessor Data: Figure 10.23 shows a typical flow chart for multiprocessor
serial data transmission. After SCI3 initialization, follow the procedure below.
1
2
3
Write transmit data to TDR
Set PDR = 0 and PCR = 1
Clear bit TE in SCR3 to 0
Read bit TDRE in SSR
Read bit TEND in SSR
Set bit MPBT in SSR
Figure 10.23 Typical Multiprocessor Data Transmission Flow Chart
Break output?
transmitting?
TDRE = 1?
TEND = 1?
Continue
Start
End
Yes
Yes
Yes
No
Yes
No
No
No
1.
2.
3.
Read the serial status register (SSR), and
after confirming that bit TDRE = 1, set bit
MPBT (multiprocessor bit transmit) in SSR
to 0 or 1, then write transmit data in the
transmit data register (TDR).
When data is written to TDR, TDRE is
automatically cleared to 0.
To continue transmitting data, read bit
TDRE to make sure it is set to 1, then
write the next data to TDR.
When data is written to TDR, TDRE
is automatically cleared to 0.
To output a break signal at the end of data
transmission, first set the port values
PCR = 1 and PDR = 0, then clear bit TE
in SCR3 to 0.
287