QDE-825D BANNER ENGINEERING, QDE-825D Datasheet - Page 19

• Manufacturer Part Number: QDE-825D
• Description: Safety Light Curtain
• Manufacturer: BANNER ENGINEERING

Specifications of QDE-825D

• Light Curtain Type: Safety
• Accessory Type: Machine Interface Cable
• For Use With: EZ-Screen Safety Light Screen

EZ-SCREEN
Instruction Manual
†
2.7 Specifications
2.7.1 General Specifications
Not including blanking
Short Circuit Protection
Electrical Safety Class
(IEC 61140: 1997)
Safety Rating
Resolution
Operating Range
Effective Aperture Angle
(EAA)
Enclosure
Operating Conditions
Shock and Vibration
Mounting Hardware
Cables and Connections
Certifications
Banner Engineering Corp.
Banner Engineering Corp.
Banner Engineering Corp.
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
www.bannerengineering.com • Tel: [phone]
www.bannerengineering.com • Tel: [phone]
www.bannerengineering.com • Tel: [phone]
†
and
•
•
•
•
Minneapolis, U.S.A.
Minneapolis, U.S.A.
Minneapolis, U.S.A.
Minneapolis, U.S.A.
All inputs and outputs are protected from short circuits to +24V dc or dc common.
III
Type 4 per IEC 61496-1, -2; Category 4 PL e, per EN ISO 13849-1; SIL 3 per IEC 61508;
SIL CL 3 per IEC 62061
14 mm models: 0.1 m to 6 m (4" to 20')
30 mm models: 0.1 m to 18 m (4" to 60')
Range decreases with use of mirrors and/or lens shields:
See the specific mirror data sheet or the Banner Safety Catalog for further information.
Meets Type 4 requirements per IEC 61496-2, Section 5.2.9
Size: See Figure 2-2
Materials: Extruded aluminum housing with yellow polyester powder finish standard (optional black or
Rating: IEC IP65
Temperature: 0° to +55° C (+32° to 131°F)
Max. Relative Humidity: 95% maximum relative humidity (non-condensing)
EZ-SCREEN components have passed vibration and shock tests according to IEC 61496-1. This
includes vibration (10 cycles) of 10-55 Hz at 0.35 mm (0.014") single amplitude (0.70 mm peak-to-
peak) and shock of 10 g for 16 milliseconds (6,000 cycles).
Emitter and receiver each are supplied with a pair of swivel end-mounting brackets. Models longer
than 900 mm also include a swivel center-mount bracket. Mounting brackets are 8-gauge cold-rolled
steel, black zinc finish.
See Section 2.3 for recommended QD cables. If other cables are used with the EZ-SCREEN, the user
must verify suitability of these cables for each application.
± 2.5° @ 3 m
Lens shields – approximately 10% less range per shield.
Glass-surface mirrors – approximately 8% less range per mirror.
IEC 61496-1, -2: Type 4
EN ISO 13849-1: Cat 4 PL e
IEC61496-1, -2: Type 4
ISO13849-1(EN954-1): Cat4
white or nickel-plated silver finish) and well-sealed, rugged die-cast zinc end caps, acrylic
lens cover, copolyester access cover. End caps on silver models are also nickel-plated.
ESD-safe models have static-dissipative acrylic lens cover.
Components and Specifications
C
R
US
NIPF(7)
UL1998, UL61496
Overview
P/N 112852 rev. F
P/N 112852 rev. F
P/N 133487
17
17
17