NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 137

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

128
Touch Switches
Reference:
Reference:
S Window moves by a minimum touch switch size (20 20).
S Be sure to complete all the window moving operation when in the window mov-
S The PT continues operating during printing.
S The printer type and printing method (color/monochrome (8 grayscale levels))
S A hard copy of the screen can also be printed by operation with the PT status
When the window is in a moving status (while
of the window), the following points differ from the normal running status.
Screen Print Key Function
This function allows starting and stopping of the printing of a hard copy of the
currently displayed screen (screen image) at a printer connected to the PT.
The attributes for screen printing are as follows.
3. Press the touch panel of the PT at the moving destination.
ing status, since its behavior differs from the one when in the normal running
status.
is determined by memory switch setting at the PT.
control bits. In this case also, printing can be stopped part way through by
pressing a touch switch.
Settings
The window is changed to the frame display only as follows, with the
mark at the center of it.
Window is moved so that the center position of the window comes to the
pressed position.
This time, Display Position of the corresponding window area is changed.
• The elements which use the touch panel as an input do not function re-
• Switching to the system menu is not possible.
• Screen switching or window controlling due to the change in bit memory
• Screen saver function does not work.
• There is no time-limit for a window moving status. It will not return to the
Print Screen
gardless of the screens (base/window) they are registered on. Only the
specification of the window moving destination is possible.
table, PT status control area or window control area is not possible.
normal running status until the moving destination is specified.
Printing of
Display Screen
Press the moving destination
Window moving key
move
Set whether the touch switch is to start printing or stop
printing.
Start/Abort
mark is displayed at the center
move
Section
2-7