NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 62

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Areas for Control/Notification
Reference:
Reference:
Reference: The display history can also be initialized from the MEMORY INIT. MENU screen
S The buzzer will actually sound only when the Buzzer Sound memory switch of
S The buzzer can also be stopped in other ways: by using a touch switch to which
S The buzzer can also be controlled by using the Buzzer screen attributes (page
under the System Menu of the PT.
S It is also possible to print screens by using a touch switch assigned the Print
S The printer type (control protocol) and printing method, are set with the
If more than one of these bits is ON at the same time, the buzzer sounds in accor-
dance with the following order of priority.
1. Continuous buzzer
2. Short intermittent buzzer
3. Long intermittent buzzer
When stopping the buzzer by PT status control bit operation, set all three of the
bits above to 0 (OFF).
Display History Initialization (Bit 11)
This bit is used to initialize the display history recorded in the PT.
When it is switched from 0 (OFF) to 1 (ON), the display history in the PT is initial-
ized.
After initialization, return its status to 0.
Backlight Mode (Bit 8)
The backlight mode is used for controlling the backlight of the PT. This bit is
invalid in the NT631.
The status of bit 8 has the following effects.
Screen Printing (Bit 7)
Hard copies of the screen can be made when a printer is connected to the PT.
When bit 7 is set from 0 (OFF) to 1 (ON), printing of the currently displayed
screen starts. Note that it is not possible to stop printing while printing is in prog-
ress.
Check that bit 7 (printer operating status) of the PT status notify area is in the 0
(OFF) status before starting printing.
When printing starts and bit 7 has been set to the 1 (ON) status, return the screen
printing bit to 0 (OFF).
PT Window Opening Bit (Bit 6)
The PT window opening bit is used to disable opening of a window by operation
at the PT.
The status of bit 6 has the following effects.
the PT is set to ON.
the buzzer stop attribute has been assigned (page 290), or by setting the
screen attribute that stops the buzzer sound (page 39).
39).
screen function.
memory switches of the PT.
• 1 (ON):
• 0 (OFF):
lit
flashing
Section
2-2
53