NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 294

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Setting
Operation
Setting
Turning off the Screen Using the Screen Saver Function of the PT
Turning off the Screen by the Operation at the PT Status Control Area
Buzzer, Backlight, and Display Control
Reference:
Reference: If a value is set other than 000 for Screen Saver Start up Time and Display for
Note To prevent the formation of an afterimage, either use the screen saver function
S The screen can be made to enter the no-display state by specifying screen No.
S While the screen is in the no-display state, only screen switching operations
S Even though the screen display is set to off, the display of the screen immedi-
Screen Saver Movement, the character string set in character string table No. 0
is displayed on the screen at random. In this case, the backlight is not turned off.
• Using the screen saver function of the PT
• Operating the PT status control area
or periodically switch screens.
If this method is used, the screen is automatically turned off when no operation is
attempted for a preset length of time.
Using the system menu of the PT, set a value other than 000 for Screen Saver
Start up Time (the length of time before the screen saver is activated after the
last PT operation) and Display erased for Screen Saver Movement. (The screen
saver function is not executed if 000 is set for Screen Saver Start up Time.)
If the PT has not been operated (touch switch operation, screen switching op-
eration) for the preset length of time during operation of the PT, the screen is au-
tomatically turned off.
This method makes it possible to turn off the screen at any required time.
The PT status control area must be allocated to a word in the host, accordingly,
no special settings are required for the control of buzzer.
Turning off the screen
0. In this state, however, the backlight remains lit or flashing.
from the host are permitted.
ately before the screen is turned off remains output by the PT.
PT
PT status control area
Screen switch setting
Copy memory
table setting
PT status control setting
Reserved for system use
PC
Section
← Control data
285
3-2