NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 28

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

NT31/NT31C
NT631/NT631C
1-3-2 Connecting to the Host
System Configuration
Reference:
Reference: When using an RS-232C/422A convertor unit (NT-AL001) with the host link or
S The following optional devices are available. All of them can be used either
S The following optional devices are available. All of them can be used either with
1:1 NT Link communication method, RS-485 cannot be used. The connection
must be made with RS-232C or RS-422A.
Replacement backlight
Anti-reflective film (5 sheets)
Chemical-resistant cover
Replacement battery
Replacement backlight
Anti-reflective film (5 sheets)
Chemical-resistant cover
Replacement battery
The NT31/NT31C has the following two communication ports.
• Serial port A:
• Serial port B:
The host can be connected at either of these two ports.
The connection methods for each communication method at the PT and host
sides are indicated below. Make the settings in accordance with the communica-
tion method that can be used with the PC to be connected and the conditions at
the operation site.
The NT631/NT631C has the following two communication ports. (Serial port B
has an RS-422A/485 terminal block as well as an RS-232C connector; use the
memory switch to select the serial communications method.)
• Serial port A:
• Serial port B: Use the memory switch to select RS-232C or RS-422A/485.
with NT31 or NT31C.
NT631 or NT631C except for the replacement backlights.
D-SUB 9-pin connector
For RS-232C use only (The Support Tool and bar code readers can be con-
nected here.)
D-SUB 25-pin connector
For RS-232C or RS-422A/485 (Selectable by memory switch)
(The Support Tool and bar code readers cannot be connected here.)
D-SUB 9-pin connector
For RS-232C use only (The Support Tool and bar code readers can be con-
nected here.)
RS-232C
RS-422A/485
Communications
System installer (made by OMRON)
The system installer is supplied as a standard accessory with the Support
Tool (NT-ZJCAT1-EV4).
D-SUB 9-pin connector
Terminal block
Connection
NT31C-CFL01
NT30-KBA04
NT30-KBA01
C500-BAT08
NT631C-CFL01 (for the NT631C-ST151j)
NT631C-CFL02 (for the NT631C-ST141j)
NT610C-KBA04
NT625-KBA01
C500-BAT08
Cannot be used for Support Tool
or bar code reader.
---
Notes
Section
1-3
19