NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 161

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Semi-Circle
152
Graphs
Circle
Quarter
Anti-clockwise
Anti-clockwise
Anti-clockwise
Clockwise
Clockwise
Clockwise
Anti-
clockwise
Anti-
clockwise
Clockwise
Clock-
wise
Anti-clockwise
Clockwise
Incremental Direction of Analogue Meters
The incremental directions of the analogue meter depending on the setting
made for Meter Shape, Display Direction and Meter Direction are shown below.
Method for Calculating The Percentage Value
The percentage is calculated as follows, depending on whether it is larger or
smaller than the 0% value.
When displayed numeric value y 0%, and when no check mark is set for Display
Sign:
When displayed numeric value<0%:
Method for Displaying The Percentage Value
The percentage value will be displayed as a signed value regardless of the ana-
log meter’s Display Sign setting. The percentage value is always displayed as
5-digit value: the sign character, 3-digit numerical value, and % character. (The
sign character is a blank space for positive values.)
Percentage value =
Percentage value =
Percentage value =
Percentage value =
Anti-clockwise
Anti-clockwise
Anti-clockwise
Clockwise
Clockwise
Clockwise
Anti-clockwise
Clockwise
Displayed numeric value [0%]
Displayed numeric value - [0%]
Displayed numeric value [0%]
Displayed numeric value - [0%]
Clockwise
Anti-
clockwise
Anti-
clockwise
Clock-
wise
[0%] - [-100%]
[0%] - [-100%]
[100%] - [0%]
[100%] - [0%]
0% position
0% position is determined by me-
ter direction. It is not influenced by
display direction.
With a display sign: 0% position comes at the
center of the meter.
No display sign (positive value only):
With a display sign: 0% position comes at the
center of the meter
No display sign (positive value only):
Anti-clockwise=
Clockwise=
Anti-clockwise=
(Bold line position in the figure)
(Dotted line position in the figure)
Clockwise =
(Bold line position in the figure)
(Dotted line position in the figure)
0% position comes at
0% position comes at
the left side of the
0% position comes at
the right side of the
meter.
the left side of the meter
0% position comes at
the right side of the
meter
meter.
×100
×100
×100
×100
Section
2-10