IPR-RLDRAMII Altera, IPR-RLDRAMII Datasheet - Page 23
![no-image](/images/manufacturer_photos/0/0/40/altera_sml.jpg)
IPR-RLDRAMII
Manufacturer Part Number
IPR-RLDRAMII
Description
IP CORE Renewal Of IP-RLDRAMII
Manufacturer
Altera
Series
Memory Controllers - SDRAMr
Type
MegaCorer
Specifications of IPR-RLDRAMII
Software Application
IP CORE, Memory Controllers, SDRAM
Tool Function
Intellectual Property (IP) Core
Supported Devices
HardCopy, Stratix
Function
RLDRAM II Controller
License
Renewal License
Lead Free Status / RoHS Status
na
Lead Free Status / RoHS Status
na
Altera Corporation
November 2009
edit the PLLs to meet your requirements with the altpll MegaWizard
Plug-In. IP Toolbench overwrites your PLLs in your project directory
unless you turn off Update example design system PLL.
The external clocks are generated using standard I/O pins in double data
rate I/O (DDIO) mode (using the altddio_out megafunction). This
generation matches the way in which the write data is generated and
allows better control of the skew between the clock and the data to meet
the timing requirements of the RLDRAM II device.
The PLL has the following outputs:
■
■
■
■
The recommended configuration for implementing the RLDRAM II
controller in Stratix II series and HardCopy II devices is to use a single
enhanced PLL to produce all the required clock signals. No external clock
buffer is required as the Altera device can generate clock signals for the
RLDRAM II devices.
Figure 2–9 on page 2–14
Output c0 drives the system clock that clocks most of the controller
including the control logic and datapath.
Output c1 drives the write clock that lags the system clock.
Output c2 optionally drives the address and command clock.
Output c3 drives the DQS DLL clock.
MegaCore Version 9.1
RLDRAM II Controller MegaCore Function User Guide
shows the recommended PLL configuration.
Functional Description
2–13
TM