5M2210ZF256C5N Altera, 5M2210ZF256C5N Datasheet - Page 62

• Manufacturer Part Number: 5M2210ZF256C5N
• Description: ALTERA
• Manufacturer: Altera
• Series: MAX Vr

Specifications of 5M2210ZF256C5N

• Cpld Type: FLASH
• No. Of Macrocells: 1700
• No. Of I/o's: 271
• Propagation Delay: 7.5ns
• Global Clock Setup Time: 4.6ns
• Frequency: 201.1MHz
• Supply Voltage Range: 1.71V To 1.89V
• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 7.0ns
• Voltage Supply - Internal: 1.71 V ~ 1.89 V
• Number Of Logic Elements/blocks: 2210
• Number Of Macrocells: 1700
• Number Of Gates: -
• Number Of I /o: 203
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 256-LBGA
• Rohs Compliant: Yes
• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

Altera and Partner Development Kits
Development Kits
60
1
RoHS compliant.
Product and Vendor Name
PROCStar II, ProcStar III
GiDEL
DNMEG S2GX Stratix II GX-Based ASIC
Prototyping Kit
The Dini Group
S3 Compute
Iris Technologies
DN7002k10MEG
The Dini Group
DN7406k10PCIe-8T
The Dini Group
DNMEG S2GX
The Dini Group
Stratix IV E FPGA Development Kit
Altera
Stratix III FPGA Development Kit
Altera
Altera Product Catalog
•
2011
•
www.altera.com
EP2SGX90EF1152C3N
EP4SE820F43CxN
EP4SE530F43CxN
EP4SE820F43CxN
EP4SE530F43CxN
Stratix II GX
Stratix II GX
Stratix IV E
EP4SE530
EP3SL150
Stratix III
Stratix III
Stratix IV
Stratix IV
Stratix IV
Stratix III
Stratix II
Device
Description
This system provides high-capacity, high-speed, multi-FPGA-based
prototyping and end system platforms.
This is a logic emulation daughtercard enabling ASIC or IP designers
to cost-effectively prototype logic and memory designs. The
DNMEG_S2GX is hosted on any DN7000 or DN8000 series ASIC Dini
Group product, but can also be used alone.
This ASIC prototyping board, compliant with PCI-SIG, features two
Altera Stratix III EP3SL340 devices, two DDR2 SODIMM, and four
HSMC connectors.
This is a complete logic emulation system that allows you to
prototype SoC logic and memory designs. It can operate as a
standalone, or hosted via a USB interface. A single system,
configured with two Stratix IV EP4SE820 FPGAs, can emulate up to
13 million gates. All FPGA resources are available for the target
application. Each FPGA position can use any available speed grade.
This is a complete logic prototyping system that allows you to
prototype logic and memory designs. The DN7406k10PCIe-8T
is hosted in an eight-lane PCIe Gen1 bus, but can be used as a
standalone and configured via USB or CompactFlash. A single board
configured with six Altera Stratix IV EP4SE820 FPGAs can emulate
up to 31 million gates. All of the FPGA resources are available for
your application. Use any combination of speed grades.
This daughtercard enables you to prototype logic and memory
designs. It is hosted on any DN8000- or DN7000-series ASIC
emulation products from the Dini Group, but can be used as a
standalone. It contains the Stratix II GX EP2SGX90 (speed grades
-5, -4, or -3) and can emulate over 600K gates. One DDR2 SDRAM
SODIMM is provided, allowing the FPGA to address up to 2 GB
of memory.
This kit allows rapid and early development of designs for
high-performance Stratix IV FPGAs. The development board provides
general I/Os that connect to onboard switches and indicators, and
to the included two-line LCD and 128 x 64-pixel graphics display.
The board also has non-volatile and volatile memories (64-MB
flash, 4-MB pseudo-SRAM, 36-Mb QDR II SRAM, 128-MB DDR2
DIMM, and 16-MB DDR2 device), HSMC, and 10/100/1000 Ethernet
interfaces. The kit is delivered with Quartus II software and all of the
cabling required to start using the board straight out of the box.
This kit allows rapid and early development of designs for high-
performance Stratix III FPGAs. The development board provides
general I/Os that connect to onboard switches and indicators, and
to the included two-line LCD and 128 x 64-pixel graphics display.
The board also has non-volatile and volatile memories (64-MB
flash, 4-MB pseudo-SRAM, 36-Mb QDR II SRAM, 128-MB DDR2
DIMM, and 16-MB DDR2 device), HSMC, and 10/100/1000 Ethernet
interfaces. The kit is delivered with Quartus II software and all of the
cabling required to start using the board straight out of the box.