ST92T163R4T1 STMicroelectronics, ST92T163R4T1 Datasheet - Page 190

• Manufacturer Part Number: ST92T163R4T1
• Description: Microcontrollers (MCU) OTP EPROM 20K USB/I2
• Manufacturer: STMicroelectronics

Specifications of ST92T163R4T1

• Data Bus Width: 8 bit, 16 bit
• Program Memory Type: EPROM
• Program Memory Size: 20 KB
• Data Ram Size: 2 KB
• Interface Type: I2C, SCI, USB
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 64
• Number Of Timers: 2
• Operating Supply Voltage: 4 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Package / Case: TQFP-64
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit
• Lead Free Status / Rohs Status: No

ST92163 - I2C BUS INTERFACE
I
I
(I2CCCR)
R243 - Read / Write
Register Page: 20
Reset Value: 0000 0000 (00h)
Bit 7 = FM/SM Fast/Standard I
This bit is used to select between fast and stand-
ard mode. See the description of the following bits.
It is set and cleared by software. It is not cleared
when the peripheral is disabled (I2CCR.PE=0)
Bit 6:0 = CC[6:0] 9-bit divider programming
Implementation of a programmable clock divider.
These bits and the CC[8:7] bits of the I2CECCR
register select the speed of the bus (F
pending on the I
They are not cleared when the interface is disa-
bled (I2CCR.PE=0).
– Standard mode (FM/SM=0): F
– Fast mode (FM/SM=1): F
Note: The programmed frequency is available
with no load on SCL and SDA pins.
190/224
2
2
C INTERFACE (Cont’d)
C CLOCK CONTROL REGISTER
FM/SM
7
F
F
SCL
SCL
CC6
= INTCLK/(2x([CC8..CC0]+2))
= INTCLK/(3x([CC8..CC0]+2))
2
CC5
C mode.
CC4 CC3 CC2 CC1 CC0
SCL
2
C mode.
> 100kHz
SCL
<= 100kHz
SCL
) de-
0
I
(I2COAR1)
R244 - Read / Write
Register Page:20
Reset Value: 0000 0000 (00h)
7-bit Addressing Mode
Bit 7:1 = ADD[7:1] Interface address .
These bits define the I
face.
They are not cleared when the interface is disa-
bled (I2CCR.PE=0).
Bit 0 = ADD0 Address direction bit.
This bit is don’t care; the interface acknowledges
either 0 or 1.
It is not cleared when the interface is disabled
(I2CCR.PE=0).
Note: Address 01h is always ignored.
10-bit Addressing Mode
Bit 7:0 = ADD[7:0] Interface address .
These are the least significant bits of the I
address of the interface.
They are not cleared when the interface is disa-
bled (I2CCR.PE=0).
2
ADD7 ADD6 ADD5 ADD4 ADD3 ADD2 ADD1 ADD0
C OWN ADDRESS REGISTER 1
7
2
C bus address of the inter-
2
Cbus
0