5384 3M Interconnect Solutions, 5384 Datasheet - Page 10

Manufacturer Part Number

5384

Description

Manufacturer

3M Interconnect Solutions

Datasheet

1.5384.pdf (16 pages)

Lead Free Status / Rohs Status

Supplier Unconfirmed

14.

15.

Note: Ground braid, constant force spring and cold shrink jacket tube are in the same bag.

16.

17.

Figure 16

Figure 17

Figure 18

Select one mastic strip from kit and remove white release liners. Using light tension, apply a single wrap

of mastic around the cable jacket 1/4" (6 mm) from cut edge (Figure 16). Cut off excess.

Position pre-formed ground braid with short tail over wire shield directly adjacent to cable jacket cut

edge. Position long tail of ground braid, extending over cable jacket with solder block over mastic strip

(Figure 17). Secure ground braid to cable jacket using vinyl tape at least 2" (50 mm) from edge of cable

jacket (Figure 17).

Wrap ground braid around cable tape shield wires one complete wrap, trim excess to prevent overlap and

secure in place with constant force spring. Wrap spring in same direction as ground braid (Figure 18).

Cinch (tighten) the spring after wrapping the final winding.

Select second mastic strip from kit and remove white release liners. Apply a second mastic band over

solder block on ground braid and previously applied mastic (Figure 18) Cut off excess.

��

78-8126-9102-6-B