5384 3M Interconnect Solutions, 5384 Datasheet - Page 13

Manufacturer Part Number

5384

Description

Manufacturer

3M Interconnect Solutions

Datasheet

1.5384.pdf (16 pages)

Lead Free Status / Rohs Status

Supplier Unconfirmed

24.

Note: Ground braid, constant force spring and cold shrink jacket tube are in the same bag.

25.

26.

27.

Figure 25

Figure 26

Figure 27

78-8126-9102-6-B

Position pre-formed ground braid with short tail directly over cut edge of folded back shield wires.

Position long tail of ground braid, extending over cable semi-conductive jacket with solder block over

mastic strip (Figure 25). Secure ground braid to cable jacket using vinyl tape at least 2" (50 mm) from

end of shield wires (Figure 25).

Wrap ground braid around cable shield wires one complete wrap, trim excess to prevent overlap and

secure in place with constant force spring. Wrap spring in same direction as ground braid (Figure 26).

Cinch (tighten) the spring after wrapping the final winding.

Select second mastic strip from kit and remove white release liners. Apply a second mastic band over

solder block on ground braid and previously applied mastic (Figure 26) Cut off excess.

Wrap two half-lapped layers of vinyl tape around mastic seal, constant force spring and 1/2" (13 mm)

onto exposed shield wires (Figure 27).

��

� ��

��