5384 3M Interconnect Solutions, 5384 Datasheet - Page 11

Manufacturer Part Number

5384

Description

Manufacturer

3M Interconnect Solutions

Datasheet

1.5384.pdf (16 pages)

Lead Free Status / Rohs Status

Supplier Unconfirmed

18.

19.

20.

Figure 19

Figure 20

Figure 21

78-8126-9102-6-B

Wrap two half-lapped layers of vinyl tape around mastic seal, constant force spring and 1/2" (13 mm)

onto shield wires (Figure 19).

Install Cold Shrink jacket tube beginning 1" (25 mm) from end of semi-con (Figure 20). Go to “B. Install

Termination”, this section.

Prepare cable using dimensions shown in Figure 21. Be sure to allow for depth of terminal lug. Pull

shield wires through semi-conductive jacket to leading edge of constant force spring (Figure 21).

In cables with cloth or paper semi-conductive shields, it is recommended the shield be overwrapped

with one half-lapped layer of highly stretched semi-conductive rubber tape such as Scotch

Semi-Conducting Tape 13 to keep cable semicon from unwinding.

Instructions for UniShield® Feeder Cables With Ground Connection

SPECIAL NOTE FOR CLOTH OR PAPER SEMI-CON INSULATION SHIELD

��

� ��

��

Electrical