AT32UC3C1256C Atmel Corporation, AT32UC3C1256C Datasheet - Page 975

• Manufacturer Part Number: AT32UC3C1256C
• Manufacturer: Atmel Corporation

Specifications of AT32UC3C1256C

• Flash (kbytes): 256 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 81
• Ext Interrupts: 100
• Usb Transceiver: 1
• Quadrature Decoder Channels: 2
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 7
• Twi (i2c): 3
• Uart: 5
• Can: 2
• Lin: 5
• Ssc: 1
• Ethernet: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 2000
• Analog Comparators: 4
• Resistive Touch Screen: No
• Dac Channels: 4
• Dac Resolution (bits): 12
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 68
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6 or 4.5 to 5.5
• Operating Voltage (vcc): 3.0 to 3.6 or 4.5 to 5.5
• Fpu: Yes
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 22
• Input Capture Channels: 12
• Pwm Channels: 19
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

33.6.2.5
32117C–AVR-08/11
Output Override
The two complementary outputs DTOHx and DTOLx of the dead-time generator can be forced
to a value defined by the software.
Figure 33-8. Override Output Selection
The OSHx and OSLx fields in the
puts of the dead-time generator DTOHx and DTOLx to be overridden by the value defined in the
OOVHx and OOVLx fields in
The set registers
Update Register” on page 1018
channel regardless of other channels. In the same way, the clear registers
Clear Register” on page 1017
(OSC and OSCUPD) disable the override of the outputs of a channel regardless of other
channels.
By using buffer OSSUPD and OSCUPD registers, the output selection of PWM outputs is done
synchronously to the channel counter, at the beginning of the next PWM period.
By using OSS and OSC registers, the output selection of PWM outputs is done asynchronously
to the channel counter, as soon as the register is written.
The value of the current output selection can be read in OS.
While overriding PWM outputs, the channel counters continue to run, only the PWM outputs are
forced to user defined values.
”Output Selection Set Register” on page 1016
the”Output Override Value Register” on page 1014
and
(OSS and OSSUPD) enable the override of the outputs of a
”Output Selection Register” on page 1015
”Output Selection Clear Update Register” on page 1019
DTOHx
OOVHx
DTOLx
OOVLx
OSHx
OSLx
0
1
0
1
OOOHx
OOOLx
and
”Output Selection Set
AT32UC3C
(OS) allow the out-
”Output Selection
(OOV).
975