SAM3U2E Atmel Corporation, SAM3U2E Datasheet - Page 102

• Manufacturer Part Number: SAM3U2E
• Manufacturer: Atmel Corporation

Specifications of SAM3U2E

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 96 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 57
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 5
• Twi (i2c): 2
• Uart: 5
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

13.11.1
13.11.1.1
13.11.1.2
13.11.1.3
13.11.1.4
13.11.1.5
102
ADR
SAM3U Series
ADR
Syntax
Operation
Restrictions
Condition flags
Examples
R1, TextMessage
Load PC-relative address.
where:
cond
Rd
label
ADR determines the address by adding an immediate value to the PC, and writes the result to
the destination register.
ADR produces position-independent code, because the address is PC-relative.
If you use ADR to generate a target address for a BX or BLX instruction, you must ensure that
bit[0] of the address you generate is set to1 for correct execution.
Values of label must be within the range of − 4095 to +4095 from the address in the PC.
You might have to use the .W suffix to get the maximum offset range or to generate addresses
that are not word-aligned. See
Rd must not be SP and must not be PC.
This instruction does not change the flags.
ADR{cond} Rd, label
is an optional condition code, see
is the destination register.
is a PC-relative expression. See
; Write address value of a location labelled as
; TextMessage to R1
“Instruction width selection” on page
“PC-relative expressions” on page
“Conditional execution” on page
100.
6430E–ATARM–29-Aug-11
98.
98.