SAM3U2E Atmel Corporation, SAM3U2E Datasheet - Page 420

• Manufacturer Part Number: SAM3U2E
• Manufacturer: Atmel Corporation

Specifications of SAM3U2E

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 96 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 57
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 5
• Twi (i2c): 2
• Uart: 5
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

• RECERR6: Recoverable Error in the page between the 1536th and the 1791st bytes or between the 3072nd and
Fixed to 0 if
0: No Errors Detected.
1: Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise multiple uncorrected errors
were detected.
• ECCERR6: ECC Error in the page between the 1536th and the 1791st bytes or between the 3072nd and the
Fixed to 0 if
0: No Errors Detected.
1: A single bit error occurred in the ECC bytes.
Read ECC Parity 6 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR6: Multiple Error in the page between the 1536th and the 1791st bytes or between the 3072nd and the
Fixed to 0 if
0: No Multiple Errors Detected.
1: Multiple Errors Detected.
• RECERR7: Recoverable Error in the page between the 1792nd and the 2047th bytes or between the 3584th and
Fixed to 0 if
0: No Errors Detected.
1: Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise, multiple uncorrected errors
were detected.
• ECCERR7: ECC Error in the page between the 1792nd and the 2047th bytes or between the 3584th and the
Fixed to 0 if
0: No Errors Detected.
1: A single bit error occurred in the ECC bytes.
Read ECC Parity 7 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR7: Multiple Error in the page between the 1792nd and the 2047th bytes or between the 3584th and the
Fixed to 0 if
0: No Multiple Errors Detected.
1: Multiple Errors Detected.
420
420
the 3583rd bytes
3583rd bytes
3583rd bytes
the 4095th bytes
4095th bytes
4095th bytes
SAM3U Series
SAM3U Series
TYPECORREC = 0.
TYPECORREC = 0.
TYPECORREC = 0.
TYPECORREC = 0.
TYPECORREC = 0.
TYPECORREC = 0.
6430E–ATARM–29-Aug-11
6430E–ATARM–29-Aug-11