SAM9G20 Atmel Corporation, SAM9G20 Datasheet - Page 848

• Manufacturer Part Number: SAM9G20
• Manufacturer: Atmel Corporation

Specifications of SAM9G20

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 7
• Ssc: 1
• Ethernet: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 4
• Adc Resolution (bits): 10
• Adc Speed (ksps): 95
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

39.7.8.12
848
848
SAM9G35
SAM9G35
Checksum
The last field of a frame is the checksum. The checksum contains the inverted 8- bit sum with
carry, over all data bytes or all data bytes and the protected identifier. Checksum calculation
over the data bytes only is called classic checksum and it is used for communication with LIN 1.3
slaves. Checksum calculation over the data bytes and the protected identifier byte is called
enhanced checksum and it is used for communication with LIN 2.0 slaves.
The USART can be configured to:
This configuration is made by the Checksum Type (CHKTYP) and Checksum Disable (CHKDIS)
fields of the LIN Mode register (US_LINMR).
If the checksum feature is disabled, the user can send it manually all the same, by considering
the checksum as a normal data byte and by adding 1 to the response data length (see
39.7.8.11).
• Send/Check an Enhanced checksum automatically (CHKDIS = 0 & CHKTYP = 0)
• Send/Check a Classic checksum automatically (CHKDIS = 0 & CHKTYP = 1)
• Not send/check a checksum (CHKDIS = 1)
11053B–ATARM–22-Sep-11
11053B–ATARM–22-Sep-11
Section