NAND08GAH0A NUMONYX [Numonyx B.V], NAND08GAH0A Datasheet - Page 100

• Manufacturer Part Number: NAND08GAH0A
• Manufacturer: NUMONYX [Numonyx B.V]

Serial peripheral interface (SPI) mode
10.6.3
Figure 37. R2 response format
10.6.4
Figure 38. R3 response format
100/116
(MSB)
(MSB)
7
0
39
0
R2 format
This is the format of the response sent by the device to the SEND_STATUS command. R2
format responses are two bytes long. The first byte is identical to the R1 response byte. All
the bits in the second byte are error bits; any one of them going High, (set to ‘1’) indicates an
error.
Refer to
meaning of the bits.
R3 format
This is the format of the response sent by the device to the READ_OCR command. R3
format responses are five bytes long. The first byte is identical to the R1 response byte. The
other four bytes contain the OCR Register.
response format.
Byte 1
Byte 1
R1
R1
Figure 37
for the structure of the R2 response format and to
0
32
7
31
Byte 2
Figure 38
Bytes 2, 3, 4 and 5
shows the structure of the R3
NAND08GAH0A, NAND16GAH0D
OCR
0
Write Protect Violation
Card is Locked
WP Erase Skip
Lock/Unlock cmd failed
Execution Error
Card Error
Card ECC failed
Erase Param
Out of Range/ CSD_Overwrite
Table 68
for the
AI13612
AI08369
0