MCP215X/40EV-DB Microchip Technology, MCP215X/40EV-DB Datasheet - Page 66

• Manufacturer Part Number: MCP215X/40EV-DB
• Description: BOARD DEMO FOR MCP215X/40
• Manufacturer: Microchip Technology

Specifications of MCP215X/40EV-DB

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150, MCP2155, MCP2140
• Primary Attributes: PICDEM™ Demo Board Interface
• Processor To Be Evaluated: MCP21x
• Interface Type: UART
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

DS51591A-page 62
D.1.5
Application Note 941 supports doing Demo #3, the Data Logger (250 Byte) demo. For
this, the embedded system must be configured as in Figure D-7.
D.1.5.1
The GUI consists of a number of user interface elements including command buttons,
text labels and a text-entry field. Figure D-10 identifies the buttons, while the text below
describes the operation of the button.
FIGURE D-10:
1. The Connect button attempts to establish a connection to the IR demo board.
2. The Read Data button causes a query to be sent to the demo board requesting
3. The Clear Data button sends a command to the demo board instructing it to reset
4. The Send Byte button transfers the byte entered into the TX Data (ASCII) text
5. The Get File button initiates the 240-byte data transfer from the embedded
6. The Send File button allows the user to select a file on the PC and transfer it to
7. The Close button closes the application.
The PC is acting as the Primary device and the demo board acts as the
Secondary device.
a tally of the number of sodas and candies dispensed. Data received from the
demo board is parsed and displayed in text labels.
the application level counters.
box. Any byte may be entered and transferred to the embedded system. If the
byte corresponds to one of the commands to read data, clear data or transfer a
buffer, the board will respond depending on its mode (vending machine or
250-byte transfer).
system by sending the embedded system the command byte for the transfer.
the embedded system.
Window XP PC with an IrDA Standard Port Demo using the
AN941 Application Program
THE WINDOWS XP PC GUI
5
2
WINDOWS XP PC WINDOW
© 2006 Microchip Technology Inc.
1
3
4
6
7