MCP215X/40EV-DB Microchip Technology, MCP215X/40EV-DB Datasheet - Page 83

• Manufacturer Part Number: MCP215X/40EV-DB
• Description: BOARD DEMO FOR MCP215X/40
• Manufacturer: Microchip Technology

Specifications of MCP215X/40EV-DB

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150, MCP2155, MCP2140
• Primary Attributes: PICDEM™ Demo Board Interface
• Processor To Be Evaluated: MCP21x
• Interface Type: UART
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

© 2006 Microchip Technology Inc.
9. In the New Connection Properties window, select the Settings tab. The
10. Configure the New Connection Properties Settings.
11. Select the ASCII Setup button. This will open the ASCII Setup window
12. In the “ASCII Sending” portion of the window:
13. In the “ASCII Receiving” portion of the window:
14. Ensure that your settings match the settings shown.
15. Select the OK button. This closes the ASCII Setup window and returns focus to
FIGURE F-5:
window will now look as shown in Figure F-5. Ensure that your settings match
the settings shown.
- Under the “Function, arrow and control keys act as” item, select the
- Under the “Backspace key sends” item, select the Ctrl+H radio button.
- From the “Emulation” pull-down menu, select Auto-detect.
- For “Telnet Terminal ID”, enter ANSI.
- For “Backscroll buffer lines”, select 500 from the pull-down menu.
(Figure F-5).
- Check “Send line ends with line feeds”.
- Check “Echo typed characters locally”.
- Set the “Line delay” and the “Character delay” to ‘0’ milliseconds.
- Uncheck “Append line feeds to incoming line ends”.
- Uncheck “Force incoming data to 7-bit ASCII”.
- Check “Wrap lines that exceed terminal width”.
the New Connection Properties window.
Configuring the HyperTerminal
Terminal Keys radio button.
NEW CONNECTION PROPERTIES - ASCII SETUP
®
Program
DS51591A-page 79