OM11014 NXP Semiconductors, OM11014 Datasheet - Page 31

• Manufacturer Part Number: OM11014
• Description: BOARD EVAL FOR LPC2919
• Manufacturer: NXP Semiconductors
• Series: Keilr
• Type: MCUr

Specifications of OM11014

• Contents: Board, Cable, CD
• For Use With/related Products: LPC2919
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 568-4360

NXP Semiconductors
LPC2917_19_1
Product data sheet
Fig 7.
system bus
AHB
Modulation and sampling control subsystem block diagram
ADC2_EXT_START
ADC1_EXT_START
8.7.2.1 Synchronization and trigger features of the MSCSS
PWM0 CAP[2:0]
PWM1 CAP[2:0]
PWM2 CAP[2:0]
PWM3 CAP[2:0]
ADC2 IN[7:0]
ADC1 IN[7:0]
PWM0 TRAP
PWM1 TRAP
PWM2 TRAP
PWM3 TRAP
AHB2APB
BRIDGE
ADC clock
control. Several other trigger possibilities are provided for the ADCs (external, cascaded
or following a PWM). The capture inputs of both timers can also be used to capture the
start pulse of the ADCs.
The PWMs can be used to generate waveforms in which the frequency, duty cycle and
rising and falling edges can be controlled very precisely. Capture inputs are provided to
measure event phases compared to the main counter. Depending on the applications,
these inputs can be connected to digital sensor motor outputs or digital external signals.
Interrupt signals are generated on several events to closely interact with the CPU.
The ADCs can be used for any application needing accurate digitized data from analog
sources. To support applications like motor control, a mechanism to synchronize several
PWMs and ADCs is available (sync_in and sync_out).
Note that the PWMs run on the PWM clock and the ADCs on the ADC clock, see
Section
The MSCSS contains two internal timers to generate synchronization and carrier pulses
for the ADCs and PWMs.
PWM modules.
APB sub system bus
(to all sub blocks)
8.8.4.
CARRIERS
CONTROL
CONTROL
Rev. 01 — 31 July 2008
TIMER 0
TIMER 1
MSCSS
MSCSS
SYNCS
PWM
ADC
Figure 8
shows how the timers are connected to the ADC and
PWM
0
PWM
1
ARM9 microcontroller with CAN and LIN
PWM
3.3 V
ADC
2
1
PWM
3.3 V
ADC
LPC2917/19
3
2
PWM0 MAT[5:0]
PWM1 MAT[5:0]
PWM2 MAT[5:0]
PWM3 MAT[5:0]
© NXP B.V. 2008. All rights reserved.
002aad348
31 of 67