INDART-ONE/FSL SofTec Microsystems SRL, INDART-ONE/FSL Datasheet - Page 96

• Manufacturer Part Number: INDART-ONE/FSL
• Description: PROG/DEBUG FOR HC08/HCS08/HCS12
• Manufacturer: SofTec Microsystems SRL
• Series: inDARTr
• Type: In-Circuit, Real-Time Debugger/Programmerr

Specifications of INDART-ONE/FSL

• Contents: In-circuit debugger/programmer unit, Cables, Evaluation Board and Software
• For Use With/related Products: Freescale HC08/S08/RS08/S12/S12X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 520-1038; INDART-ONE

9
inDART Programming Library
These files are automatically installed by the inDART-One Utilities setup, as
described in “inDART-One Utilities Setup” on page 28.
9.4 Programming Library Reference
9.4.1 Using the Interface Library Functions
When you control one or more inDART-One within your own application, you
will typically follow the steps indicated below:
1.
2.
3.
4.
94
The “udart01.inf” file in “Windows\Inf”;
The “IPL-One.dll”, “BL-One.dll”, “PI-One.dll” and all of the
“Drv*.dll” files into your application’s directory.
Initialize the programming session.
The IPL_StartSession() function must be called prior to any other
IPL function. This function detects all inDART-One instruments
connected to the USB bus and determines whether fast programming
algorithms are unlocked.
Initialize the instrument(s).
To communicate with the target device you need to initialize the
instrument(s) with target device information. Initialization functions
include:
Program.
Once the instrument(s) has/have been set up, you can begin
programming, with the IPL_StartProgramming() function.
Close the communication with the instrument(s).
This is done by the IPL_EndSession() function. Closing the
IPL_GetDeviceList()
IPL_SetDevice()
IPL_SetCommunicationSettings()
IPL_LoadFileIntoBuffer()