PIC18F66J11-I/PT Microchip Technology, PIC18F66J11-I/PT Datasheet - Page 100

• Manufacturer Part Number: PIC18F66J11-I/PT
• Description: IC PIC MCU FLASH 32KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F66J11-I/PT

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Type: FLASH
• Ram Size: 3930 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 52
• Ram Memory Size: 3.837890625KB
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3904 B
• Interface Type: EUSART, I2C, MSSP, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162091 - HEADER MPLAB ICD2 18F87J11 64/80MA180020 - MODULE PLUG-IN HPC EXPL 18F87J11AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F87J11 FAMILY
7.1
The operation of the interface is controlled by the
MEMCON register (Register 7-1). This register is
available in all program memory operating modes
except Microcontroller mode. In this mode, the register
is disabled and cannot be written to.
The EBDIS bit (MEMCON<7>) controls the operation
of the bus and related port functions. Clearing EBDIS
enables the interface and disables the I/O functions of
the ports, as well as any other functions multiplexed to
those pins. Setting the bit enables the I/O ports and
other functions, but allows the interface to override
everything else on the pins when an external memory
operation is required. By default, the external bus is
always enabled and disables all other I/O.
The operation of the EBDIS bit is also influenced by the
program memory mode being used. This is discussed
in more detail in Section 7.5 “Program Memory
Modes and the External Memory Bus”.
REGISTER 7-1:
DS39778D-page 100
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5-4
bit 3-2
bit 1-0
EBDIS
R/W-0
External Memory Bus Control
EBDIS: External Bus Disable bit
1 = External bus enabled when microcontroller accesses external memory; otherwise, all external bus
0 = External bus always enabled, I/O ports are disabled
Unimplemented: Read as ‘0’
WAIT1:WAIT0: Table Reads and Writes Bus Cycle Wait Count bits
11 = Table reads and writes will wait 0 T
10 = Table reads and writes will wait 1 T
01 = Table reads and writes will wait 2 T
00 = Table reads and writes will wait 3 T
Unimplemented: Read as ‘0’
WM1:WM0: TBLWT Operation with 16-Bit Data Bus Width Select bits
1x = Word Write mode: TABLAT word output, WRH active when TABLAT written
01 = Byte Select mode: TABLAT data copied on both MSB and LSB, WRH and (UB or LB) will activate
00 = Byte Write mode: TABLAT data copied on both MSB and LSB, WRH or WRL will activate
drivers are mapped as I/O ports
U-0
—
MEMCON: EXTERNAL MEMORY BUS CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
WAIT1
R/W-0
WAIT0
R/W-0
CY
CY
CY
CY
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
The WAIT bits allow for the addition of wait states to
external memory operations. The use of these bits is
discussed in Section 7.3 “Wait States”.
The WM bits select the particular operating mode used
when the bus is operating in 16-Bit Data Width mode.
These are discussed in more detail in Section 7.6
“16-Bit Data Width Modes”. These bits have no effect
when an 8-bit Data Width mode is selected.
The MEMCON register (see Register 7-1) shares the
same memory space as the PR2 register and can be
alternately selected based on the designation of the
ADSHR
Register 24-9).
U-0
—
bit
U-0
in
—
the
© 2009 Microchip Technology Inc.
x = Bit is unknown
WDTCON
R/W-0
WM1
register
R/W-0
WM0
bit 0
(see