PIC18F65K90T-I/PT Microchip Technology, PIC18F65K90T-I/PT Datasheet - Page 319

• Manufacturer Part Number: PIC18F65K90T-I/PT
• Description: 32kB Flash, 2kB RAM, 1kB EE, NanoWatt XLP, LCD 64 TQFP 10x10x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F65K90T-I/PT

• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Timers: 8
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 53
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP
• Lead Free Status / Rohs Status: Details

21.4.3.2
Masking an address bit causes that bit to become a
“don’t care”. When one address bit is masked, two
addresses will be Acknowledged and cause an
interrupt. It is possible to mask more than one address
bit at a time, which greatly expands the number of
addresses Acknowledged.
The I
masking is used or not. However, when address
masking is used, the I
multiple addresses and cause interrupts. When this
occurs, it is necessary to determine which address
caused the interrupt by checking the SSPxBUF.
The PIC18F87K90 family of devices is capable of using
two different Address Masking modes in I
operation: 5-Bit Address Masking and 7-Bit Address
Masking. The Masking mode is selected at device
configuration using the MSSPMSK Configuration bit.
The default device configuration is 7-Bit Address
Masking.
Both Masking modes, in turn, support address masking
of 7-bit and 10-bit addresses. The combination of
Masking modes and addresses provide different
ranges of Acknowledgable addresses for each
combination.
While both Masking modes function in roughly the
same manner, the way they use address masks are
different.
21.4.3.3
As the name implies, 5-Bit Address Masking mode
uses an address mask of up to 5 bits to create a range
of addresses to be Acknowledged, using bits, 5 through
1, of the incoming address. This allows the module to
EXAMPLE 21-2:
 2009-2011 Microchip Technology Inc.
7-Bit Addressing:
10-Bit Addressing:
2
C slave behaves the same way whether address
SSPxADD<7:1>= A0h (1010000) (SSPxADD<0> is assumed to be ‘0’)
ADMSK<5:1> = 00111
Addresses Acknowledged: A0h, A2h, A4h, A6h, A8h, AAh, ACh, AEh
SSPxADD<7:0> = A0h (10100000) (The two MSb of the address are ignored in this example, since
they are not affected by masking)
ADMSK<5:1> = 00111
Addresses Acknowledged: A0h, A1h, A2h, A3h, A4h, A5h, A6h, A7h, A8h, A9h, AAh, ABh, ACh, ADh,
AEh, AFh
Address Masking Modes
5-Bit Address Masking Mode
ADDRESS MASKING EXAMPLES IN 5-BIT MASKING MODE
2
C slave can Acknowledge
2
C slave
PIC18F87K90 FAMILY
Acknowledge up to 31 addresses when using 7-bit
addressing, or 63 addresses with 10-bit addressing
(see
when the MSSPMSK Configuration bit is programmed
(‘0’).
The address mask in this mode is stored in the
SSPxCON2 register, which stops functioning as a
control register in I
7-Bit Address Masking mode, address mask bits,
ADMSK<5:1> (SSPxCON2<5:1>), mask the corre-
sponding address bits in the SSPxADD register. For
any ADMSK bits that are set (ADMSK<n> = 1), the cor-
responding address bit is ignored (SSPxADD<n> = x).
For the module to issue an address Acknowledge, it is
sufficient to match only on addresses that do not have
an active address mask.
In 10-Bit Address Masking mode, bits, ADMSK<5:2>,
mask the corresponding address bits in the SSPxADD
register. In addition, ADMSK1 simultaneously masks
the two LSbs of the address (SSPxADD<1:0>). For any
ADMSK bits that are active (ADMSK<n> = 1), the cor-
responding address bit is ignored (SPxADD<n> = x).
Also note, that although in 10-Bit Address Masking
mode, the upper address bits reuse part of the
SSPxADD register bits. The address mask bits do not
interact with those bits; they only affect the lower
address bits.
Note 1: ADMSK1 masks the two Least Significant
Example
2: The two Most Significant bits of the
bits of the address.
address are not affected by address
masking.
21-2). This Masking mode is selected
2
C Slave mode
DS39957D-page 319
(Register
21-6). In