LSISAS1064 LSI, LSISAS1064 Datasheet - Page 15

• Manufacturer Part Number: LSISAS1064
• Manufacturer: LSI

Specifications of LSISAS1064

• Lead Free Status / RoHS Status: Not Compliant

1.1
1. In some instances, this manual references PCI-X explicitly. References to the PCI bus may
be inclusive of both the PCI specification and PCI-X addendum, or may only refer to the PCI
bus depending on the operating mode of the device.
General Description
Chapter 1
Introduction
The LSISAS1064 is a four-port 3.0 Gbit/s SAS/SATA controller that is
compliant with the Fusion-MPT
interface, and supports the Integrated RAID
contains the following sections:
The LSISAS1064 controller brings 3.0-Gbit/s SAS performance to host
adapter, workstation, and server designs, making it easy to add a SAS
interface to any PCI or PCI-X
high-performance SAS/SATA phys and a 64-bit, 133 MHz PCI-X bus
master DMA core. Each of the four phys on the LSISAS1064 is capable
of 3.0 Gbit/s and 1.5 Gbit/s SAS link rates, and 3.0 Gbit/s and 1.5 Gbit/s
SATA link rates. The LSISAS1064 supports the SAS protocol as
described in the Serial Attached SCSI Standard, version 1.0, as well as
SAS 1.1 features, such as support for the BROADCAST (SES) primitive
and support for SATA port selectors. The controller also supports the
Serial ATA (SATA) protocol defined by the Serial ATA specification,
LSISAS1064 PCI-X to 4-Port Serial Attached SCSI/SATA Controller
Copyright © 2003–2005 by LSI Logic Corporation. All rights reserved.
Section 1.1, “General Description”
Section 1.2, “Benefits of SAS”
Section 1.3, “Benefits of the Fusion-MPT Architecture”
Section 1.4, “Benefits of PCI-X”
Section 1.5, “Benefits of GigaBlaze
Section 1.6, “Summary of LSISAS1064 Features”
1
system. The LSISAS1064 integrates four
™
architecture, provides a PCI-X
®
Transceivers”
™
solution. This chapter
1-1