NP8P128A13BSM60E Micron Technology Inc, NP8P128A13BSM60E Datasheet - Page 22

• Manufacturer Part Number: NP8P128A13BSM60E
• Manufacturer: Micron Technology Inc

Specifications of NP8P128A13BSM60E

• Lead Free Status / Rohs Status: Supplier Unconfirmed

7.0
7.1
7.2
Table 9:
Notes:
1.
2.
Datasheet
22
Manufacturer Code
Device Code
Block Lock Configuration
• Block Is Unlocked
• Block Is Locked
• Block Is not Locked-Down
• Block Is Locked-Down
• Reserved for Future Use
Lock Protection Register 0
64-bit Factory-Programmable Protection Register
64-bit User-Programmable Protection Register
Lock Protection Register 1
16x128 bit User-Programmable Protection Registers
DBA = Device Base Address. (A[MAX:18] = DBA). Numonyx reserves other configuration address locations.
BBA = Block Base Address.
Read Identifier Table
Read Operation
Numonyx® Omneo™ P8P PCM has several read modes:
Read Array Command
The Read Array command places (or resets) the device to read array mode. Upon initial
device power-up or after reset (RST# transitions from V
to read array mode. If an Erase- or Program-Suspend command suspends the WSM, a
subsequent Read Array command will place the device in read array mode. The Read
Array command functions independently of V
Read Identifier Command
The read identifier mode is used to access the manufacturer/device identifier, block lock
status, and protection register codes. The identifier space occupies the address range
supplied by the Read Identifier command (90h) address.
• Read array mode: read returns PCM array data from the addressed locations.
• Read identifier mode: reads returns manufacturer device identifier data, block
• Read query mode: read returns device CFI (or query) data.
• Read Status Register mode: read returns the device Status Register data. A
lock status, and protection register data.
system processor can check the Status Register to determine the device’s state or
monitor program or erase progress.
(3)
Item
DBA + 000000h
DBA + 000001h
BBA + 000002h
DBA + 000080h
DBA + 000081h–000084h
DBA + 000085h–000088h
DBA + 000089h
DBA + 00008Ah–0000109h
Address
PP
voltage.
(1,2)
Numonyx® Omneo™ P8P Datasheet
IL
to V
IH
), the device defaults
Protection Register Data
Protection Register Data
Protection Register Data
ID (see
DQ
DQ
DQ
DQ
DQ[7:2]
PR-LK0
PR-LK1
0089h
Data
Lock
Table 10
0
0
1
1
= 0
= 1
= 0
= 1
August 2010
316144-07
)