LPC2926_27_29 NXP Semiconductors, LPC2926_27_29 Datasheet - Page 13

• Manufacturer Part Number: LPC2926_27_29
• Description: The LPC2926/2927/2929 combine an ARM968E-S CPU core with two integrated TCMblocks operating at frequencies of up to 125 MHz, Full-speed USB 2
• Manufacturer: NXP Semiconductors

NXP Semiconductors
LPC2926_27_29
Product data sheet
6.3 On-chip flash memory system
6.4 On-chip static RAM
The LPC2926/2927/2929 includes a 256 kB, 512 kB or 768 kB flash memory system. This
memory can be used for both code and data storage. Programming of the flash memory
can be accomplished via the flash memory controller or the JTAG.
The flash controller also supports a 16 kB, byte-accessible on-chip EEPROM integrated
on the LPC2926/2927/2929.
In addition to the two 32 kB TCMs the LPC2926/2927/2929 includes two static RAM
memories: one of 32 kB and one of 16 kB. Both may be used for code and/or data
storage.
In addition, 8 kB SRAM for the ETB can be used as static memory for code and data
storage. However, DMA access to this memory region is not supported.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 28 September 2010
ARM9 microcontroller with CAN, LIN, and USB
LPC2926/2927/2929
© NXP B.V. 2010. All rights reserved.
13 of 95